Search Results for "arm"
-
Cubieboard A20
The cubie A20 uses an Allwinner A20 processor which has a dual core CPU and twice GPU performance.
1,200.00 EGP1,650.00 EGPCubieboard A20
1,200.00 EGP1,650.00 EGP -
CubieTruck
The Cubietruck (also named Cubieboard3) is the 3rd board of Cubieteam. It’s an ARM mini PC running various Linux distros and/or Android system.
As the cubieboard2, Cubietruck features the All winner A20 (ARM cortex-A7 dual-core processor) onboard.
It provides many enhancements like: 2GB DDR3 memory, 10M/100M/1G Ethernet PHY, Wi-Fi, Bluetooth, VGA output, etc.
1,650.00 EGPCubieTruck
1,650.00 EGP -
32 Channel USB Servo Motor Drive Shield – Arduino Compatible
-
32Pcs, Servo Motor Control Board
-
Can Support PS2
750.00 EGP -
-
1.2V 2000mah AA Panasonic Rechargeable Battery
Are you looking for a reliable and long-lasting rechargeable battery for your electronic devices? Look no further than the 1.2V 2000mAh AA Panasonic Rechargeable Battery.
44.00 EGP -
S3003 Servo Motor
This is the Futaba S3003 Standard Servo.This basic servo is used in cars, boats, or where standard servos are used.This is the replacement for the following servos, S138,S148,S22,S38 and S12.This servo can produce high-current draw from your batteries.If using NiMH or LiPo batteries, make sure they are capableof delivering sufficient amps. 160.00 EGPS3003 Servo Motor
160.00 EGP -
Buzzer 3-24V (95DB)
Sfm-27 Dc 3-24V 90Db Intermittent Beep Alarm Electronic Buzzer Sounder Cf
30.00 EGPBuzzer 3-24V (95DB)
30.00 EGP -
DS1307 DIP
DS1307 DIP
The DS1307 DIP is a real-time clock (RTC) IC manufactured by Maxim Integrated. It comes in a 16-pin DIP package and is commonly used for accurate timekeeping in electronic devices. The DS1307 DIP communicates via the I2C protocol, has a built-in quartz crystal oscillator for accuracy, and can retain time during power outages with a backup battery. It is widely used in various applications such as data loggers, timers, and alarm systems. Overall, the DS1307 DIP provides reliable timekeeping functionality in a convenient package.
20.00 EGPDS1307 DIP
20.00 EGP -
DS18B20
This is the latest DS18B20 1-Wire digital temperature sensor from Maxim IC.
Reports degrees C with 9 to 12-bit precision, -55C to 125C (+/-0.5C).
Each sensor has a unique 64-Bit Serial number etched into it – allows for a huge number of sensors to be used on one data bus.
This is a wonderful part that is the corner stone of many data-logging and temperature control projects.
30.00 EGPDS18B20
30.00 EGP -
Flexible LED Strip 5M 12V Rgb
5050 72W 12V 300 Diodes 16.4ft Roll IP65 Silicon covering waterproof RGB Led Strip Light . It is 5050 60leds/m, total is 300 leds per 5m roll. it is waterproof with silicone glue covering , and with 3M adhesive tape on the back.It can work directly by the remote controller and power supply. We also can customize according to your request. 5050 RGB led strip light. Welcome OEM and ODM.
250.00 EGPFlexible LED Strip 5M 12V Rgb
250.00 EGP -
SIM800L V2.0 5V Wireless Quad Band GSM GPRS Module PCB Antenna
Wireless Quad Band GSM GPRS Module
This module power supply for 5 v, computer debug USB to TTL serial port. Power supply can output current of 800 mA, TTL serial interface is compatible with 3.3 V and 5 V single chip microcomputer.
400.00 EGP -
L293D 4-DC Motor Driver
DC Motor Driver
The drive module can directly drive four DC motors, drive the car chassis is 4WD 4 choice. Driving battery big up to 1A generally smart car motor current 100-300MA only four are sufficient to meet the control requirements.
The circuit stability. Can directly drive 4-way 3-16V DC motor, and provides a 5V output interface (input as little as 6V), You can give 5V microcontroller circuit system power supply (low ripple factor), Support 3.3V MCU ARM control, You can easily control DC motor speed and direction can be controlled two-phase stepper motor, 5-wire 4-phase stepper motor.
165.00 EGPL293D 4-DC Motor Driver
165.00 EGP -
IBT-2 Motor Driver 43A
IBT-2 43A H-Bridge Motor Driver Module the drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and overcurrent protection.
motor driver H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive High Current up to 43A
IBT-2 motor driver is a fully integrated high current H bridge module for motor drive applications.
Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs, diagnosis with current sense, slew rate adjustment, dead time generation and protection against overtemperature, overvoltage, under voltage, overcurrent and short circuit.
provides a cost optimized solution for protected high current PWM motor drives with very low board space consumption.
The 43a motor driver IBT-2 H-bridge module is an inexpensive, high power motor driver based on two BTS7960 chips
This driver 43a motor driver uses two high current half bridge Infineon BTS 7960 chip for motor drive applications. Interfacing to a microcontroller is made easy using this driver which features current sensing, slew rate adjustment and protection against over temperature, overvoltage, under voltage, over current and short circuit.
This small size driver provides a cost optimized solution for protected high current PWM motor drives.
275.00 EGPIBT-2 Motor Driver 43A
275.00 EGP