Menu

Mechanic DSP30D5 Digital Programmable DC Power Supply (30V / 5A)

Mechanic DSP30D5 Digital Programmable DC Power Supply (30V / 5A)

Electra Store SKU: SA-26116
5,350.00 EGP

In Stock

1

Share to

Categories: Power Supplies

Overview

The Mechanic DSP30D5 is a programmable DC power supply with 0–30V and 0–5A adjustable output, a 4-digit LED display and 150W capacity for electronics testing and repair.

Description

Mechanic DSP30D5 Digital Programmable DC Power Supply (30V / 5A)

Product Description

The Mechanic DSP30D5 is a regulated DC bench power supply for electronics testing, maintenance and repair. It gives you an adjustable output of up to 30V and 5A, with a 4-digit LED display that shows the voltage and current. If your bench needs a clean, controllable source to power boards and devices under test, the Mechanic DSP30D5 power supply covers that job with a compact, workshop-ready unit.

The idea is straightforward. You set the voltage you need, set the current limit, and connect the load. Both values adjust continuously from zero up to the maximum, so you are not forced to pick fixed steps. The display shows live readings, so you can watch how much current a board draws as it powers up, which is often the first clue when you diagnose a fault.

Several practical functions make daily use easier. An output switch lets you turn the output on and off without disconnecting your leads. A panel lock prevents the settings from being changed by accident, which is useful on a busy bench. Power-off memory keeps your settings when the unit is switched off, so you do not have to dial in the same values every morning.

A supply that runs at its full 150W rating generates heat, so cooling matters. The DSP30D5 has a fan on the rear of the case, a double-sided heat sink and ventilation holes on both sides. This three-side approach to heat dissipation helps the unit stay stable during long testing sessions and repair shifts.

Output regulation is also specified, with tight voltage stability and load stability figures and a fast recovery time. Together they mean the output holds steady when the load changes, which is important when you test sensitive electronics. The unit works from AC 110V or 220V mains, so it suits workshops in different regions.

Typical uses include powering and testing circuit boards, checking current draw on repaired devices, supplying prototypes during development and running equipment during maintenance. It also suits electronics labs and training workshops, where students need a dependable adjustable source.

Customers choose this model for its simple controls, its 150W capacity at an accessible size and the safety-minded extras such as the panel lock and output switch. Mechanic is a familiar name in repair tooling, so accessories and support are easy to find. For repair shops, technicians and students in Egypt looking for a 30V 5A digital power supply, the DSP30D5 is a practical, bench-friendly option.

Features

  • Continuously adjustable output voltage and current for flexible testing

  • Clear 4-digit LED display for live voltage and current readings

  • Output switch to turn the output on and off without disconnecting the load

  • Power-off memory that retains your settings between sessions

  • Panel lock to prevent accidental changes to the settings

  • Cooling system with a rear fan, a double-sided heat sink and side ventilation holes

  • Stable output regulation for sensitive electronics

  • Programmable design suited to repeatable bench work

  • Works from 110V or 220V AC mains

Specifications

  • Brand: Mechanic

  • Model: DSP30D5

  • Product Type: Programmable DC regulated power supply

  • Output Voltage: 0–30V, continuously adjustable

  • Output Current: 0–5A, continuously adjustable

  • Maximum Power: 150W

  • Display: 4-digit LED

  • Input Voltage: AC 110V / 220V

  • Voltage Stability: ≤0.01% + 3mV

  • Load Stability: ≤0.01% + 3mV

  • Recovery Time: 100µs

  • Temperature Coefficient: ≤300ppm/°C

  • Functions: Output switch, power-off memory, panel lock

  • Cooling: Rear fan, double-sided heat sink, side ventilation holes

  • Dimensions: 270 × 150 × 160 mm

  • Net Weight: 3.55 kg

Applications

  • Electronics repair and maintenance benches

  • Powering and testing circuit boards

  • Checking current draw on repaired devices

  • Powering prototypes during development

  • Electronics labs and training workshops

  • Equipment testing in service centres

  • General-purpose adjustable DC supply for workshops

Mechanic DSP30D5 Digital Programmable DC Power Supply (30V / 5A)

5,350.00 EGP