🔹 Key Features

✅ SOIC8 (150mil) & SOP8 (208mil) Compatibility – Works with common flash chips (e.g., W25Q80, MX25L8005, AT25DF041). ✅ Spring-Loaded Test Clip – Securely attaches to chips without soldering. ✅ 1.27mm Pitch Socket Adapter – For direct breadboard or programmer connection. ✅ Wired for SPI (VCC, GND, MISO, MOSI, SCK, CS, WP, HOLD) – Compatible with CH341A, Raspberry Pi, FlashROM, USB SPI programmers. ✅ Durable & Compact – Lightweight, portable, and reusable.

🔹 Common Uses

• Recovering bricked devices (motherboards, routers, modems).

• Dumping/flashing BIOS/UEFI firmware.

• Arduino/ESP8266/ESP32 external memory programming.

• Reading/writing EEPROM, Flash, or serial memory chips.

🔹 How to Use

1. Power off the target device (avoid short circuits).

2. Align the clip with the chip’s pinout (check orientation!).

3. Connect to a programmer (e.g., CH341A, Raspberry Pi).

4. Read/write using software (FlashROM, AsProgrammer, etc.).

⚠️ Troubleshooting Tips

• No connection? Check for proper pin alignment and clean oxidized pins.

• 3.3V only! Do not use on 5V chips without a level shifter.

• Unstable reads? Secure the clip and verify wiring.

📦 Package Options

• Test Clip Only (w/ 15cm ribbon cable).

• Clip + SOIC8-to-DIP8 Adapter (for breadboards).

• Full Kit (clip + adapter + CH341A programmer).