Portable Battery Spot Welder 12V Set for 18650

500,00 EGP

In stock

0000000527439
Purchase this product now and earn 5 Points!
Compare

Portable Battery Spot Welder 12V Set for 18650

Battery Spot Welder Spot Welding Pen Circuit Board Kit 12V-14.6V For 18650 Battery

Features:

  • Portable, stable and reliable spot welder kit
  •  Used for welding 18650/26650/32650 lithium batteries, etc.
  •  Powered by 12V battery (not included). Welding current is about 90A ~ 130A
  • Suitable for welding common 0.1mm ~ 0.15mm nickel plated sheet
  • Upgrade to automatic trigger welding, free your fingers pressing buttons
  • The battery pack that can start the car can basically meet the power supply requirements of this circuit

Specifications:  

  • System Voltage: 12V-14.6V
  • Working Current: 90-150A

Recommended Batteries (Not Included):

  • For 20-45ah lead-acid battery with good performance and small internal resistance
  • For 3.5-5.5ah 45C 3S aeromodel lithium battery pack
  • For 30-35ah capacity 18650 battery pack

Function Introduction:

  • Powered by a 12V battery, the circuit will be an energy storage spot welder.
  • It can be used to weld nickel sheet for lithium batteries, nickel-chromium batteries and the like.
  • According to different configurations, the thickness that can be welded is about 0.1mm-0.15mm.
  • After all, this device is designed for electronics enthusiasts, and the working frequency is not very high.

Switch Functions:

  • Press the switch for 1.5s to turn on. Green light flashes, low-power spot welding pulses are output every 3 seconds.
  • Press the switch for 1.5s. Blue light flashes and medium power spot welding pulses are output every 3 seconds.
  • Press the switch for 1.5s. Red light flashes and high-power spot welding pulses are output every 3 seconds.
  • Press the switch for 1.5s to turn off.

Package Included:

  • 1 X circuit board
  • 4 X copper nose
  • 4 X screw
  • 1 X buzzer
  • 1 X 1 meter nickel sheet
  • 1 X capacitance
  • 2 X soldering pen
  • 2 X input wire
  • 2 X heat shrink tube

Note:
– Batteries are not included in the package.
– This product is a semi-finished circuit board. Certain electrical knowledge and manual ability are highly recommended. Please prepare some necessary tools, such as pliers, screwdriver, soldering iron.

 

Portable Battery Spot Welder 12V Set for 18650

Portable Battery Spot Welder 12V Set for 18650

64458 02

64458 03

64458 04

64458 05

64458 06

64458 07

64458 08

Additional information

Dimensions 8 × 3,9 cm

Main Menu

0
YOUR CART
  • No products in the cart.