نظرا لعدم استقرار الأسعار ، نعتذر لكم عن أنه قد يكون هناك بعض الاختلاف في أسعار البيع مؤقتا لحين ضبط الأسعار ,, شكرا لتفهمكم

Mini ZVS Heating Board DC12~36V 300W - Electra

Mini ZVS Heating Board DC12~36V 300W

350.00 EGP

Out of stock

Mini ZVS Heating Board DC12~36V 300W Inductive Flyback Heating Driver Ignition Coil DIY Cooker+ Ignition Coil +Wireless Power Supply 2A Transmitter+ flyback transformer

Email when stock available

Compare
SKU: DB-31061 Category: Tags: , , , , ,
  • This is a non-tap mini ZVS finished board excluding heating coil, transformer, cooling fan, etc.
  • Input voltage DC 12V~36V, this voltage range is the voltage at work, not the voltage when the power supply is empty! (The voltage exceeds 15V or below 12V. We do not guarantee that it can work normally.)
  • Make sure that all components are soldered correctly, the positive and negative poles of the power cord are not reversely connected, after the load is connected (heating coil, transformer), and then power on! Can not power on at no load which makes it easily broken.
  • When inductive heating, usually work for 5 minutes to power off cooling. Because the current is relatively large during induction heating, the coil heat is also relatively large. When heating, part of the heat generated by the heated object is transmitted to the heating coil. For a long time, the temperature of the heating coil is high. If the heating coil is connected to the terminal, the plastic part of the terminal will be melted! Therefore, it is best to solder the heating coil directly to the PCB during induction heating. Please pay attention to this point.

Note:

  • When using battery and battery power supply, it must be ensured that the working voltage is above 12V,If not, do not use battery or battery power supply! Do not use dry battery power!
  • The width of the heated object should be between 1/3 and 1/2 of the inner diameter of the heating coil, and the maximum should not exceed 2/3.
  • For long-term use, it is recommended to use a copper tube as the coil and cool it with water.
  • LED power indicator to indicate whether the board is powered.
  • The reasons why the indicator light is off may be: 1. The line is not connected, and the power supply is not powered. 2. The board has component damage.
  • When the indicator light is dark, the power supply should be insufficient, and a larger power supply should be replaced.

Package Included:

  • 1 X Mini ZVS Heating Board DC12~36V 300W
Be the first to review “Mini ZVS Heating Board DC12~36V 300W”

Reviews

There are no reviews yet.

WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
👋 Hi, how can I help?

Main Menu