- You cannot add "Friendly ARM Tiny210 CPU Board" to the cart because the product is out of stock.
LandTiger NXP LPC1768
Out Of Stock
Roll over image to zoom in
2,200.00 EGP
The LandTiger development board with NXP LPC1768 ARM is an embedded system based on the second-generation ARM Cortex-M3 microcontroller core. It is designed for embedded system applications requiring a high-performance and low-power 32-bit microprocessor.
As such it is highly suitable for instrumentation, industrial communications, motor control, lighting control, alarm systems, and more. The LandTiger development board has an on-board USB emulator, supports USB2.0 Device, dual CAN interfaces, RS232 and RS485 ports. The LandTiger development board supports a wealth of hardware and software functionality for rapid project development.
Email when stock available
LandTiger development board with NXP LPC1768 ARM
The LPC7168 ARM Cortex-M3 Processor provides:
- 512KB on-chip Flash, to support ISP and IAP
- 64KB SRAM
- Processing rates 100MHz, and includes a support eight areas of memory protection unit (MPU)
- Built-nested vector interrupt controller.
- AHB multi-layer matrix with 8-channel DMA controller, general-purpose (GPDMA)
- Support the SSP, UART, AD / DA, timer, GPIO, etc., can be used for memory-to-memory transfers.
- Standard JTAG test / debug interface and debug serial line and serial line tracking port option
- Simulation trace module supports real-time tracking.
- 4 low-power modes: sleep, deep sleep, power-down, deep power-down
- Single 3.3V power supply (2.4V – 3.6V)
- Operating temperature: -40 ° C – 85 ° C
- Non-maskable interrupt (NMI) input
- On-chip integrated power-on reset circuit
- Built-in systems beat the timer (SysTick), to facilitate the operating system migration.
LandTiger Board Resources:
- 2 x RS232 serial interface (using the straight-through serial cable)
- 2 x Controller Area Network (CAN) bus communication interface (CAN Transceiver: SN65VHD230)
- 1 x RS485 communication interface (485 Transceivers: SP3485)
- 1 x RJ45-10/100M Ethernet network interface (Ethernet PHY: DP83848)
- DA output interface (USB sound card can do experiments on-board speaker and speaker output driver)
- AD input interface (adjustable potentiometer input)
- Color LCD display interface (which can take 2.8-inch or 3.2-inch color TFT 320X240)
- USB2.0 Interface, USB host and USB Device Interface.
- SD / MMC card (SPI) interface (available with FAT12, FAT16, FAT32 file system)
- IIC Interface (24LC02)
- SPI serial FLASH interfaces (AT45DB161D)
- 2 user keys, 2 function keys and the INT0 Reset button, 8 LED lights.
- Five keys to enter the joystick (Joystick)
- Serial ISP download function (no need to set jumpers), the standard JTAG download, simulation debugging interface.
- Integrated USB emulator: simulation and debug capabilities to support online and support KEIL, IAR and other mainstream development environment.
- Optional external 5V power supply or USB input to provide 5V power supply.
- Leads all the IO, user-friendly external circuit to the secondary development of other applications.
package included:
1 X LandTiger development board with NXP LPC1768 ARM