Fluid Level Controller
The device connected to an electrical pump through an electrical cable ,is used for the auto-control and no-water protection of the water tower and water pool
SKU: TL-30883 Categories: Buttons and Switches, Components, Electro Mechanical, Flow, Other Components Tags: Controller, Fluid
- Fix the counterweight on the electrical cable to control the height of the water level(the counterweight is only provided on request).
- Connect the flexible cable with the pump and fix the cable in the water tank.
- The length of the cable section between the fixture point of the same and the regulator body determines the total extension of the float and the height of the water level.
- During installation, the eventual cable joining section must never be immersed in water.
- High quality PP, environment friendly and non-toxic.
- Floating switch control switch that can adjust the level of bucket, tank or well.
- In filling the water condition, use “red and yellow” wires with this contact regulator closed when down, opens when it arrives. To empty the water condition, use the “red and green” wires with these regulator contacts, open when it reaches, close when down.
Avoid insufficient water sources by damaging the pump device
- widely used for home swimming pool, factory pool, and also used for oil tank, and other liquid containers.
- 1 X Fluid Level Controller
|Float Regulator||Liquid Controller /float switch|
|Max Current||16 (4) A|
|Working temperature||0 degee to 80 degree|
|Mechanical endurance||≥100.000 times|
|Electric endurance||≥ 50.000 times|
|Standard cable length||2m 3m 5m 10m 20m as customs required|
|Switch currency||+++ ≥50 000switch workings tested by VDE specialisation|
|Protective connection||T 70U|
|Circuit breaking capacity||Directly KW with 250V|
|Dimensions||10.2 × 7.7 × 4.7 cm|