Description

Description

• Direction of Flow: Unidirectional (Follow the arrow on the valve body);
  
• Operating mode: N / C (Normally Closed).
• Service Water Pressure: 0.02-1MPa; 
• Liquid Temperature: Less than 100 ℃; 
• Working temperature: Less than 50 ℃.
• Media: Purified water, Water, Not suitable for acidic and alkaline liquids, thick liquids, all other non-liquids.

• The water solenoid valve selects the corresponding voltage and temperature according to the actual situation when choosing the type.
• When installing the solenoid valve, the direction of fluid flow should be consistent with the direction of the arrow as shown on the valve body, the valve should be installed in the horizontal pipe tests. The solenoid valve coil remains in vertical position, the valve cannot be set up with splashing water or water leaks.
• Please install a filter at the inlet end in order to avoid inhalation of impurities, so that the solenoid valve cannot be reset,
• If the solenoid valve is closed or stuck, please open the top four screws to clean the impurities from the inner hole.
• When using, the solenoid valve should regularly clean the surface of the movable iron core and piston, the seal should be checked at the same time when disassembling, and damaged, it should be replaced in time, if applicable.
• Before installing the solenoid valve, the line must be cleaned.