-
1.3″ OLED 7 Pins Display – White 128X64
OLED 128×64 dot matrix display module. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range and low power consumption.
165.00 EGP1.3″ OLED 7 Pins Display – White 128X64
165.00 EGP -
HW-069 4 Digits 7 Segment Display Module with 0.36Inch Time Clock TM1637 Driver
The module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point.The driver chip is TM1637.
It only needs 2 signal lines to enable the MCU to control the 4-bit 8-segment digital tube
35.00 EGP -
LCD 4*20 and Controller for 3D Printer
LCD 4*20 and Controller The intelligent controller includes an SD card reader, rotary encoders, and a 20-character x 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using the “smart adapter” included
248.00 EGPLCD 4*20 and Controller for 3D Printer
248.00 EGP -
-
1.8 Inch Arrow LED Display
1.8 Inch Arrow LED Display
15.00 EGP1.8 Inch Arrow LED Display
15.00 EGP -
-
1000 LEDs White/White High Brightness 5mm
1000 LEDs White/White High Brightness 5mm
550.00 EGP1000 LEDs White/White High Brightness 5mm
550.00 EGP -
-
12V 1.5W SMD 3030 Waterproof Led Module Blue
12V 1.5W SMD 3030 Waterproof Led Module Blue
8.50 EGP -
12V 1.5W SMD 3030 Waterproof Led Module Green
12V 1.5W SMD 3030 Waterproof Led Module Green
8.50 EGP -
12V 1.5W SMD 3030 Waterproof Led Module Red
12V 1.5W SMD 3030 Waterproof Led Module Red
8.50 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories
