-
Relay Module 8 Channel 5V
This is a 5V 8-Channels Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.
8 relays are included in this module, with “NC” ports means “Normally connected to COM” and “NO” ports means “Normally open to COM”. This module also equipped with 8 LEDS to show the status of relays
195.00 EGPRelay Module 8 Channel 5V
195.00 EGP -
Relay 1 channel 30A 240VAC
30A relay module, normally open interface with maximum load: AC 240V/30A, DC 30V/30A
55.00 EGPRelay 1 channel 30A 240VAC
55.00 EGP -
Reed Switch Module
Reed switch is a kind of passive electronic switching component with contacts with a simple structure, small size and easy to control. It consists of a sealed glass envelope where there are two ferrous elastic reeds and is filled with inert gas called rhodium
35.00 EGPReed Switch Module
35.00 EGP -
ISD1820 Recording And Playback Module 10 Seconds
This ISD1820 Voice Recorder/Playback Module reproduces high-quality, natural voice and audio from the recorded audio by Mic or driven through Microcontroller.
Because of its dual operation mode (Standalone and Microcontroller driven), we can easily use this as per requirement and with a slight change of the onboard resistor, we can get flexibility in the sampling frequency of the recording duration & quality.
83.00 EGP -
GY-88 IMU 10DOF MPU6050 + HMC5883L + BMP085
This IMU 10DOF is a motion tracking module. Its design is based on the sensor MPU6050,HMC5883L and BMP085.
The sensor MPU6050 which is the world’s first integrated 6-axis Motion Tracking device, that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor (DMP).
The Honeywell’s HMC5883L which is a 3-axis digital compass.
The BMP085 is a high-accuracy chip to detect barometric pressure and temperature.You can uses it in your DIY or your product,for example, Quadcopter, Self-Balancing Robot and so on.
220.00 EGPGY-88 IMU 10DOF MPU6050 + HMC5883L + BMP085
220.00 EGP -
GY-65 BMP085 Atmospheric Pressure Altimeter Module
GY-65 BMP085 is a high precision, ultra-low power consumption pressure sensors, can be applied to mobile devices. Its performance, the absolute accuracy of the minimum can reach 0.03hPa, and very low power consumption, only 3A.
BMP085 powerful 8-pin ceramic-lead chip carrier (LCC) ultra-thin package, through the I2C bus can be connected directly with a variety of microprocessor.
72.00 EGP -
GY-61 DXL335 3-Axis Accelerometer Module
GY-61 ADXL335 Module is a small, thin, low-power, complete 3-axis accelerometer with signal conditioned voltage outputs.
The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g.
It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
This breakout board comes with an onboard voltage regulator and works at both 3.3V & 5V (3-5V).
An accelerometer is an electro-mechanical device that will measure acceleration forces.
These forces may be static, like the constant force of gravity pulling at your feet, or they could be dynamic – caused by moving or vibrating the accelerometer.
180.00 EGPGY-61 DXL335 3-Axis Accelerometer Module
180.00 EGP -
GY-291 ADXL345 3-Axis Accelerometer
GY-291 ADXL345 3-Axis is a small and efficient sensor with a high resolution (13-bit) that can measure an acceleration of up to ± 16g.
The module can be accessed via the I2C or SPI protocol and can be supplied with a voltage between 3V and 5V.
60.50 EGPGY-291 ADXL345 3-Axis Accelerometer
60.50 EGP -
-
ESP8266 Wifi Transceiver Module ESP03
ESP8266 Small transceiver module Wi-Fi-based chip, compatible with standard 802.11 b / g / n 2.4 GHz, has SPI interface, 7 GPIO, TCP / IP stack and antenna ceramic PCB.
Ideal for wireless sensor networks, home automation, building automation, and custom applications. Power: 3.3 Vdc, dimensions (mm): 17.4 x 12.2.
66.00 EGPESP8266 Wifi Transceiver Module ESP03
66.00 EGP -
ESP-07 ESP8266 UART Serial To Wifi Module For Arduino, Raspberry Pi
ESP8266 ESP-07 Serial Wi-Fi Wireless Module is a new player in this field.
It’s tiny (25mm x 15mm), with simple pin connections, using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands to query and change configurations of the Wi-Fi module.
This is quite convenient as it only requires two wires (TX/RX) to communicate between a micro-controller and Wi-Fi, but more importantly, it offloads Wi-Fi-related tasks to the module, allowing the micro-controller code to be very light-weighted.
66.00 EGP -
ENC28J60 Ethernet Network Module Mini Board
ENC28J60 Ethernet LAN Network Module for Arduino 51 AVR LPC
121.00 EGPENC28J60 Ethernet Network Module Mini Board
121.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories