Search Results for "display"
-
LandTiger NXP LPC1768
The LandTiger development board with NXP LPC1768 ARM is an embedded system based on the second-generation ARM Cortex-M3 microcontroller core. It is designed for embedded system applications requiring a high-performance and low-power 32-bit microprocessor.
As such it is highly suitable for instrumentation, industrial communications, motor control, lighting control, alarm systems, and more. The LandTiger development board has an on-board USB emulator, supports USB2.0 Device, dual CAN interfaces, RS232 and RS485 ports. The LandTiger development board supports a wealth of hardware and software functionality for rapid project development.
2,200.00 EGPLandTiger NXP LPC1768
2,200.00 EGP -
1.8 TFT SPI 128*160 (Color LCD)
1.8 inch SPI TFT LCD Display Module for ST7735 128×160 51/AVR/STM32/ARM 8/16 bit
245.00 EGP1.8 TFT SPI 128*160 (Color LCD)
245.00 EGP -
OLED 0.96 inch 128×64 white Display Module ( Unsoldered )
Yellow Blue OLED Display Module 0.96 Inch IIC Serial 128X64 I2C SSD1306 12864 LCD Screen Board GND VCC SCL SDA for Arduino STM32
140.00 EGP -
Led Matrix 8×8 With MAX7219 Module
The MAX7219 Dot Led Matrix Module is a serial input common-cathode driver that interfaces micro-controllers to LED matrices
50.00 EGPLed Matrix 8×8 With MAX7219 Module
50.00 EGP -
Digital Thermometer Sensor LCD Display-Waterproof Probe
It can test the temperature of both outdoor and indoor places such as air-conditioned room, refrigerator, fish tank or even the water temperature and body temperature Digital Thermometer Sensor
75.00 EGP -
High Bright LED Light
High Bright LED Light Lamp Chip Bead DC 30 – 36V – COLD WHITE LIGHT 30W, Very low heat generating, saving energy, environmentally.
70.00 EGPHigh Bright LED Light
70.00 EGP -
Display LCD 12864 3D Printer Controller Adapter For RAMPS 1.4
The 3D printer 128×64 Smart LCD controller for Ramps 1.4 contains a rotary encoder and a 128×64 LCD display.
330.00 EGP -
1.3″ OLED 7 Pins Display – White 128X64
OLED 128×64 dot matrix display module. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range and low power consumption.
165.00 EGP1.3″ OLED 7 Pins Display – White 128X64
165.00 EGP -
HW-069 4 Digits 7 Segment Display Module with 0.36Inch Time Clock TM1637 Driver
The module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point.The driver chip is TM1637.
It only needs 2 signal lines to enable the MCU to control the 4-bit 8-segment digital tube
45.00 EGP -
T8000AC LED RGB Pixel Controller
Led RGB full color controller is the type of point controller,so it can addressable under IC and program control ,it’s very popular in led advertising and decoration project.
598.00 EGP1,199.00 EGPT8000AC LED RGB Pixel Controller
598.00 EGP1,199.00 EGP -
5 inch HDMI Touch Screen TFT LCD Panel Module Shield 800X480 For Raspberry Pi
5 inch HDMI Touch Screen TFT LCD Panel Module Shield 800X480 For Raspberry Pi.
1,500.00 EGP