Search Results for "arm"
-
LandTiger NXP LPC1768
The LandTiger development board with NXP LPC1768 ARM is an embedded system based on the second-generation ARM Cortex-M3 microcontroller core. It is designed for embedded system applications requiring a high-performance and low-power 32-bit microprocessor.
As such it is highly suitable for instrumentation, industrial communications, motor control, lighting control, alarm systems, and more. The LandTiger development board has an on-board USB emulator, supports USB2.0 Device, dual CAN interfaces, RS232 and RS485 ports. The LandTiger development board supports a wealth of hardware and software functionality for rapid project development.
2,200.00 EGPLandTiger NXP LPC1768
2,200.00 EGP -
STM32F103ZET6 development board with 3.2″ TFT Touch LCD
-
STMicroelectronics STM32F103ZET6 ARM Cortex – M3 MCU based development board with a 3.2” Touch LCD screen. This is a high – density performance line 32 -bit MCU featuring internal 512K of FLASH memory, 64K of RAM.
-
It is rich in peripherals like USB, CAB, 11 timers, 3ADC, and many communication interfaces.
-
The microcontroller seems to be powerful enough to run quite intensive tasks, but more memory is populated on board.
2,500.00 EGP -
-
Exclusive Hand-held Heating Soldering Iron 80W with tin feeder
Hand-held Heating Soldering Iron 80W with tin feeder is an electrically powered tool for soldering metals using tin-based solder to achieve a strong mechanical bond with good electrical contact.
The soldering gun is useful when soldered joints must be made intermittently. The fast-switching gun cools quickly enough to be set down a few seconds after use.
600.00 EGP -
1.8 TFT SPI 128*160 (Color LCD)
1.8 inch SPI TFT LCD Display Module for ST7735 128×160 51/AVR/STM32/ARM 8/16 bit
220.00 EGP1.8 TFT SPI 128*160 (Color LCD)
220.00 EGP -
3S (BMS) Lithium Battery Charger Protection Module 25A 12V
3S (BMS) Lithium Battery Charger Protection Module 25A 12V
The 3S (BMS) Lithium Battery Charger Protection Module 25A 12V is a specialized module designed for the protection and charging of 3-cell lithium-ion or lithium-polymer batteries. It operates with a 12V input and has a 25A maximum current output capacity. This module ensures the safety of the battery during charging by offering protection against overcharging, over-discharging, overcurrent, and short circuits. It incorporates a Battery Management System (BMS) that actively monitors the battery’s voltage levels and temperature to prevent potential damage or hazards. Its main functions include maintaining balanced charging among cells and providing a reliable and efficient charging solution for 3-cell lithium batteries at a 12V input level.
210.00 EGP -
Orange Pi i96
The Orange Pi i96 is an open-source single-board computer built upon the 96Boards IoT Edition specification. It can run Android 4.4, Ubuntu, Debian, Raspbian and more. Based on the RDA8810PL ARM Cortex-A5 32bit SoC.
998.00 EGPOrange Pi i96
998.00 EGP -
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 30A
The Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A) is essentially a ramped up version of our Ardumoto motor driver shield. For this Monster Moto Shield, It is replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.
264.00 EGP -
Friendly ARM Tiny210 CPU Board
Friendly ARM Tiny210 CPU Board + SDK Board (V. 1309 and 1312) + 4.3″ Resistive LCD 1MHz Tiny210 ARM Cortex A8 Linux System.
The Tiny210 CPU board is designed and developed by FriendlyElec. It uses the Cortex embedded processing board and Samsung S5PV210 system chip (SOC).
The maximum frequency is 1 GHz. The S5PV210 integrates the Power Vr graphics engine of SGX540 hardware, which supports 3D and can drive video playback screens up to 1080P.
The Tiny210 CPU board has 2.0mm spacing double row pitch headers that allow Tiny210 to be connected to a carrier board and extend most of the CPU’s pins to work on both the Tiny210 and Tiny6410 carrier boards. The standard version integrates 512M DDR2 RAM and 512M Flash (1G Flash optional) and can run Android, Linux and WinCE6. These easily and widely used in mid-range development, Android notepad, auto electronics, industrial applications, GPS systems and multimedia systems.
6,500.00 EGPFriendly ARM Tiny210 CPU Board
6,500.00 EGP -
Warm/White LED Strip 2835 SMD 12V 5 Meter (240LEDs/M) – warm
Warm/White LED Strip 2835 SMD 12V 5 Meter (240LEDs/M) – warm
-