Search Results for "I2c"
-
STM32F401CCU6 Development Board For Arduino
STM32F401 Minimum System Development Board Module STM32F401CCU6
198.00 EGPSTM32F401CCU6 Development Board For Arduino
198.00 EGP -
Yellow and Blue Color 0.96 inch 128×64 SSD1306 OLED Display Module
Yellow Blue OLED Display Module 0.96 Inch IIC Serial 128X64 I2C SSD1306 12864 LCD Screen Board GND VCC SCL SDA for Arduino STM32
300.00 EGP -
Control Board Ramps 1.6 for 3D Printer
Control Board Ramps Ramps 1.6 Expansion Control Board with Heatsink Upgraded Ramps 1.4 1.5 for Arduino 3D Printer Board
220.00 EGPControl Board Ramps 1.6 for 3D Printer
220.00 EGP -
Arduino Nano Shield
This shield is designed for Arduino Nano, you can make Arduino Nano’s pins layout same as standard shield’s easily.
55.00 EGPArduino Nano Shield
55.00 EGP -
16 Channel 12-bit PWM Servo Driver – PCA9685
It’s an I2C-controlled PWM driver with a built in clock. Adjustable frequency up to about 1.6 KHz. 12-bit resolution for each output for servos, that means about 4us resolution at 60Hz update rate.
132.00 EGP16 Channel 12-bit PWM Servo Driver – PCA9685
132.00 EGP -
3D Print Control Board Ramps v1.4 Shield for Arduino Mega
Ramps is short for reprap Arduino Mega shield, it is mainly designed for the purpose of using stepper driver board (similar to 4988 driver board). Ramps can only work when connected to mainboard Mega 2560 and DRV8825. Great compatibility with most 3Dprinter (all reprap-model such as pursa i2 and i3).
Note: This Board is only the shield, Stepper Drivers and mainboard are not included.
170.00 EGP -
Joystick Shield V1 For Arduino
The Joystick Shield V1.A is an Uno compatible shield that allows you to turn an Arduino Uno or compatible into a game console or robotic controller.The joystick Shield V1.A will let you turn your Arduino board into a controller like the game console system. It can be used to control anything from a remote control car to anything that you can think of. It also provides a lot of different interfaces.
110.00 EGPJoystick Shield V1 For Arduino
110.00 EGP -
Arduino Uno Sensor Shield V4.0
Arduino Uno Sensor
This shield is compatible with most types of Arduino boards that support the standard header layout including Uno, Leonardo, and Mega. It provides a convenient way to connect various sensor modules, servo’s, or I2C LCD displays without the need for soldering.
Please note: I2C interface compatible with Uno only. When connecting multiple servos please check power requirements of each servo.
66.00 EGPArduino Uno Sensor Shield V4.0
66.00 EGP -
Arduino Nano CNC Shield V4 Board
3D printer stepper motor driver needs to work with Nano Arduino board.
It can be used as driver expansion board for engraving machines and 3D printers.
171.00 EGPArduino Nano CNC Shield V4 Board
171.00 EGP -
BMP280 Barometric Pressure & Altitude Sensor I2C/SPI Module 3.3V
Description
This BMP280 is a cheapest and tiny Atmospheric Sensor Breakout to measure barometric pressure, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BMP280 Breakout has been design to be used in indoor/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring.
This module uses an environmental sensor manufactured by Bosch with temperature, barometric pressure sensor that is the next generation upgrade to the popular BMP085/BMP180/BMP183 Sensor. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy.
The BMP280 is the next-generation of sensors, and is the upgrade to the BMP085/BMP180/BMP183 – with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either I2C or SPI. For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.
Features:-
- Get more precise temperature, atmospheric pressure values, and approximate altitude data
- Enhancement of GPS navigation (e.g. time-tofirst-fix improvement, dead-reckoning, slope detection)
- Indoor navigation (floor detection, elevator detection)
- Outdoor navigation, leisure and sports applications
- Weather forecast
- Health care applications (e.g. spirometry)
- Vertical velocity indication (e.g. rise/sink speed)
- Libraries and tutorials available for Arduino and other micro controllers
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Operating Pressure: 300 hPa to 1100 hPa
- Peak current: 1.12mA
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
60.00 EGP